Valuable Plumbing Info For Any Property OwnerIf plumbing is something that can have you stumped, you probably know how expensive it is to have it done professionally. You also may have to wait for a plumber to arrive when there's a problem happening now! Don't let this happen, read on for tips on solving your own plumbing problems!
Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe - this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.
If you have a pipe that freezes, you should turn on the faucet that is close to the pipe; this way, the water has a place to go. This can relieve the pipe pressure that could cause bursting and further home damage.
On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. http://feeds.feedburner.com/plumbersedmontoncom can catch the water and use it for other household needs to prevent wasting it.
Taking preemptive action to fix a strange smelling kitchen sink can be a good way to keep your kitchen smelling great. Make sure not to throw hair or grease into your sink. Use baking soda if you have a strange smell coming from your drain. Make sure you use your garbage disposal if you have one to grind up any food and use water while doing this to prevent damage to the blades of the garbage disposal.
If your toilet is constantly developing moisture on the outside, you may want to consider turning up the heat in your bathroom. The biggest cause of "sweaty" toilets is cool and moist air. Believe it or not, this moisture could actually cause damage to your toilet, so it is crucial that you fix the problem.
DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.
Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.
Drain the sediment from the bottom of your hot water heater twice a year to keep the hot water heater working at its optimal levels. Simply open the drain valve and allow the water to run out into a bucket until the water runs clear. Then close Furnace Repair St Albert .
If you have an odor coming from one or more fixtures in your house, it is likely this has to do with the water in water traps. Each fixture has a water trap that is sealed off to prevent odors. If the water evaporates, the odors can surface. Therefore, try adding water to the traps.
Make sure your plumbing contractor has the proper insurance before letting them work in your home. This is a big problem with all types of construction contractors. They may have the proper licenses, but because of the high cost of insurance, they may not be properly insured and can end up on your homeowners policy if they get hurt.
Do not shock yourself! Water and electricity do not mix well! If you are working with both electrical and plumbing issues at the same time, then you must avoid crossing them. Beware! The two together can be deadly! When water and electricity are mixed, the risk of getting a shock can be incredibly high, as well as deadly.
Teach kids how to shut off the toilet's water supply. Kids are notorious for putting large wads of toilet paper and other things into the toilet, which inevitably leads to the toilet overflowing. Especially if your bathroom has carpet, show kids how to turn the water valve off if the toilet water keeps rising, to prevent the mess of an overflow.
As was shown in the above article, there are many plumbing issues that can be handled by someone other than a plumber. Once you take the time to read how to do it, you will be amazed at the things you will be doing without the expense of an expert.